THE ENERGY LIBRARY

BATTERIES

 

We know how to make energy. The harder question has always been: how do we save it until we need it?

The Quiet Half of the Energy Story

Generators, solar panels, wind turbines and engines get most of the attention. But producing electricity is only half the problem. Energy often has to be stored somewhere until somebody flips a switch, starts an engine, powers a motor or turns on the lights.

A battery doesn't actually manufacture energy. It stores energy in chemical form and makes that energy available as electrical current. Different battery chemistries accomplish that job in very different ways.

THE SIMPLE VERSION:
A chemical reaction encourages electrons to move. Give those electrons an outside path through a wire and we can make them do useful work on their way from one side of the battery to the other.

Inside a Battery

−

ANODE

One electrode participates in the chemical reaction that supplies electrons to the external circuit during discharge.

≈

ELECTROLYTE

The electrolyte allows ions to move inside the cell while the electrons travel through the outside circuit.

+

CATHODE

The other electrode takes part in the complementary reaction that completes the electrochemical process.

OPEN THE TOOLBOX

Not All Batteries Are Alike

There is no single "best" battery. The right chemistry depends on what you're asking it to do.

LEAD-ACID

One of the oldest rechargeable battery technologies still in widespread use. Lead-acid batteries are inexpensive, rugged and capable of supplying a large amount of current very quickly.

GOOD AT: Starting engines, backup power, inexpensive storage   |   TRADE-OFF: Heavy and relatively low energy density

ALKALINE

The familiar disposable AA, AAA, C and D cells found in flashlights, clocks, toys and countless household devices.

GOOD AT: Low-cost household power and long shelf life   |   TRADE-OFF: Ordinary alkaline cells are generally not rechargeable

NICKEL-BASED

Nickel-metal hydride and older nickel-cadmium designs helped make rechargeable portable batteries practical long before lithium-ion became dominant.

GOOD AT: Rechargeable consumer applications   |   TRADE-OFF: Lower energy density than many lithium systems

LITHIUM-ION

Lithium-ion changed portable electronics and electric transportation by packing substantial energy into relatively small and lightweight battery packs.

GOOD AT: Phones, laptops, tools, vehicles and compact storage   |   TRADE-OFF: Cost, aging and careful thermal/electrical management

FLOW BATTERIES

Instead of keeping all of the active material inside a conventional sealed cell, many flow batteries circulate liquid electrolytes through an electrochemical stack. Bigger tanks can provide greater energy-storage capacity.

GOOD AT: Stationary and grid-scale storage   |   TRADE-OFF: Pumps, tanks and physical size
WORTH WATCHING

IRON-AIR

Iron-air batteries use one of the most familiar chemical processes on Earth: iron reacting with oxygen. During discharge, iron is oxidized. During charging, electrical energy drives the chemistry back toward metallic iron.

That makes iron attractive because it is abundant and inexpensive. The catch is that iron-air systems generally aren't trying to compete with lithium batteries on weight or compactness. Their potential strength is storing large amounts of energy where size and weight matter much less.

TERRY'S CONNECTION: If you've experimented with electrolytes, metal plates and electrolysis, some of this hardware may look strangely familiar. The important difference is what reaction we're trying to use and where the useful energy is coming from.

Storage Is Not an Energy Source

This distinction matters. A rechargeable battery must receive energy before it can return energy. Some of that energy is inevitably lost as heat and through other inefficiencies. Batteries can move energy through time, but they do not create additional energy.

CHARGE

Electrical energy drives chemical changes inside a rechargeable cell.

STORE

That energy remains available as chemical potential until it is needed.

DISCHARGE

Chemical reactions produce electrical current that can perform useful work.

So What Makes a Good Battery?

Engineers aren't chasing just one number. Improving one characteristic can make another characteristic worse.

ENERGY DENSITY
How much energy fits in a given mass or volume?
POWER
How quickly can it deliver energy?
CYCLE LIFE
How many charge cycles can it survive?
COST
What does useful storage actually cost?
SAFETY
How tolerant is it of heat, damage and failure?
ECHO-7 // LAB NOTES

"Humans have spent centuries looking for better ways to store energy. Apparently nobody wants to generate the electricity at the exact moment they need to make toast."

ECHO-7: When somebody announces a revolutionary new battery, don't begin with "Does it work?" That's too easy.

Ask:
How much energy can it store?
How quickly can we get that energy back?
How many times can we do it?
What does it cost?
And what happens when something goes wrong?

Answer those five questions and most miraculous battery stories become considerably less miraculous — or considerably more interesting.

LAB RULE #1

Follow the Energy

When evaluating any unusual battery, generator or energy claim, find the energy entering the system, measure the useful energy leaving it, and account for the losses in between. If nobody can show where the energy comes from, the mystery probably isn't in the battery.

ECHO-7 // INTERACTIVE LAB

BATTERY ANALYZER

Tell ECHO-7 what you need to power. He'll examine the mission and recommend a battery chemistry suited to the job.

ENERGY LIBRARY // BATTERIES // OBSERVE • MEASURE • QUESTION